Chaharbagh Abbasi Ave, Esfahan, Iran
    Chaharbagh Abbasi Ave, Esfahan, Iran

    The tube bundle extractor

    The tube bundle extractor is used to make it easier to pull out and heat the Shell & Tube heat exchangers.
    This device uses a diesel engine for use in the workshop environment, which eliminates the need for electricity in the workshop environment.
    The diesel engine is the actuator of the hydraulic pump that meets the needs of the hydraulic system.
    The device uses hydraulic force to apply force.
    The method of operation of the device is such that by connecting to the heat exchanger by its forks, it is possible to operate at any height.
    By engaging and connecting to the heat exchanger sheet tube, the hydraulic winch exerts a force to pull out.
    By pulling out the heat exchanger and balancing the device, it performs the act of balancing the device at a height.

    Free technical advice

    Contact us for technical advice and more information

    تیوب باندل پولر یا تیوپ باندل اکسترکتور (Tube Bundle Extractor) دستگاهی پر سرعت، ایمن و خودکار برای کاهش مشکلات بیرون کشیدن و جازدن Tube Bundle در مبدل های Shell & Tube می باشد. این دستگاه کلیه اجزاء کشنده هیدرولیکی، مکانیکی و سازه ای را در یک مساحت محدود و مفید در خود بصورت یکجا جمع کرده است و به راحتی عملیات درآوردن و جازدن تیوب باندل مبدل های حرارتی را با استفاده از یک جرثقیل و همچنین استفاده از یک Remote Control انجام می دهد.

    Advantages of using the device

    • Save time and reduce overhaul time
    • Reduce the number of workers involved
    • Increased level of safety
    • Reduce the risk of failure
    • Eliminate unconventional methods
    • Simple and secure transportation of large tube tubes
    • Increasing competition to service providers and thus increasing production efficiency
    • Requires minimal equipment to serve converters

    Company service description

    • Design and manufacture of bundle tubes in different capacities from 25 tons to 100 tons
    • Rent a device on a daily basis or a project with the operator if needed
    • Providing services for extracting and placing heat exchangers throughout the country
    • Ability to design based on customer needs for converters under the roof
    • Reconstruction and repair of polymer bundle tube devices
    • Provide advice on choosing the right device and how to use it
    • Supply of parts and accessories for the device
    • Test and setup
    • Training to work with the device

    After-sales service training

    • 18 months warranty on the device and 10 years after-sales service
    • Training to work with the device after delivery of the product
    • Provide manuals and maintenance of the device at the time of delivery

    • The tube bundle extractor with different capacities from 25 to 100 tons can be provided
    Extractor model25T

    6100x1600E

    45T

    8000x2000E

    65T

    9000x2750E

    80T

    9000x3000E

    100T

    10000x3300E

    Max.bundle weight,kg20000450006500080000100000
    Length of the tube bundle,mm71009000100001100012000
    Max. bundle diameter for extractor with standard lifting frame16002000275030003300
    width of hosting frame in operational position,mm19532425325040004000
    width of main frame,mm9001270127012701270
    height of extractor in operational position,mm25793563450055006000
    operational weight500011500135001500016500
    diesel engine, air cooled25hp25hp25hp25hp25hp
    standard hydraulic pressure, ba190190190190190
    Max.pulling force25000500005000080000100000

    تیوب باندل پولر یا تیوپ باندل اکسترکتور (Tube Bundle Extractor) دستگاهی پر سرعت، ایمن و خودکار برای کاهش مشکلات بیرون کشیدن و جازدن Tube Bundle در مبدل های Shell & Tube می باشد. این دستگاه کلیه اجزاء کشنده هیدرولیکی، مکانیکی و سازه ای را در یک مساحت محدود و مفید در خود بصورت یکجا جمع کرده است و به راحتی عملیات درآوردن و جازدن تیوب باندل مبدل های حرارتی را با استفاده از یک جرثقیل و همچنین استفاده از یک Remote Control انجام می دهد.

    The tube bundle extractor

    The tube bundle extractor is used to make it easier to pull out and heat the Shell & Tube heat exchangers.
    This device uses a diesel engine for use in the workshop environment, which eliminates the need for electricity in the workshop environment.
    The diesel engine is the actuator of the hydraulic pump that meets the needs of the hydraulic system.
    The device uses hydraulic force to apply force.
    The method of operation of the device is such that by connecting to the heat exchanger by its forks, it is possible to operate at any height.
    By engaging and connecting to the heat exchanger sheet tube, the hydraulic winch exerts a force to pull out.
    By pulling out the heat exchanger and balancing the device, it performs the act of balancing the device at a height.

    Advantages of using the device

    • Save time and reduce overhaul time
    • Reduce the number of workers involved
    • Increased level of safety
    • Reduce the risk of failure
    • Eliminate unconventional methods
    • Simple and secure transportation of large tube tubes
    • Increasing competition to service providers and thus increasing production efficiency
    • Requires minimal equipment to serve converters

    Company service description

    • Design and manufacture of bundle tubes in different capacities from 25 tons to 100 tons
    • Rent a device on a daily basis or a project with the operator if needed
    • Providing services for extracting and placing heat exchangers throughout the country
    • Ability to design based on customer needs for converters under the roof
    • Reconstruction and repair of polymer bundle tube devices
    • Provide advice on choosing the right device and how to use it
    • Supply of parts and accessories for the device
    • Test and setup
    • Training to work with the device

    After-sales service training

    • 18 months warranty on the device and 10 years after-sales service
    • Training to work with the device after delivery of the product
    • Provide manuals and maintenance of the device at the time of delivery

    Provided capacities

    • The tube bundle extractor with different capacities from 25 to 100 tons can be provided
    Extractor model25T

    6100x1600E

    45T

    8000x2000E

    65T

    9000x2750E

    80T

    9000x3000E

    100T

    10000x3300E

    Max.bundle weight,kg20000450006500080000100000
    Length of the tube bundle,mm71009000100001100012000
    Max. bundle diameter for extractor with standard lifting frame16002000275030003300
    width of hosting frame in operational position,mm19532425325040004000
    width of main frame,mm9001270127012701270
    height of extractor in operational position,mm25793563450055006000
    operational weight500011500135001500016500
    diesel engine, air cooled25hp25hp25hp25hp25hp
    standard hydraulic pressure, ba190190190190190
    Max.pulling force25000500005000080000100000

    Free technical advice

    Contact us for technical advice and more information

    با ما در ارتباط باشید / Contact us
    Send via WhatsApp