Chaharbagh Abbasi Ave, Esfahan, Iran
    Chaharbagh Abbasi Ave, Esfahan, Iran

    What is a Grippul Device

    In U-Type converters, RayTube operation is a bit difficult, so you have to first release the two ends of the tube from the tube sheet with a Tube Cutter. To do this, the two ends of the tube are first cut about 2 inches in front of the sheet tube, and the Grippul is pulled out. So that the rest of the tube, part U, can be removed from the end of the converter using a pneumatic winch or similar tool.In this design, a completely hydraulic device called a tube killer performs the operation of pulling the tube. Stub puller speeds up the operation of the re-tube.

    Due to the destruction of sheet tubes during re-tubing and the damage applied during the extraction of tube, the importance of this device is well known. Stub puller pulls out the tube without the slightest damage.

    Free technical advice

    Contact us for technical advice and more information

    null

    • Quick removal of ferrous and non-ferrous pipes from condensers, heat exchangers and boilers
    • The rapid operation of the device allows the operator to remove 10 pipes per minute
    • Taking and pulling the tube together and together
    • Lightweight and lightweight components summarized in a gun, for easy and fast use by the operator
    • Separate and discard the pumice stone quite easily and automatically after pulling out
    • Remove the tube without the slightest damage to the sheet tube
    • Low setup time and ease of use
    • Fast and automatic switching from low pressure and high current to high pressure and low current during conflict
    • Significant savings of time and money more than the usual methods of pipe removal
    • Ability to remove the tube from the size of 15.8 mm to 50.8 mm

    • Design and manufacture of heat exchanger pumice machine (grippul) with optimal performance
    • Provide services for pulling out tubes from tube sheet in a very short time
    • Ability to design based on customer needs for specific applications
    • Reconstruction and repair of grippul devices
    • Provide advice on choosing the right device and how to use it
    • Supply of machine parts and accessories in less than a week
    • Test and setup
    • Training to work with the device
    • 18 months warranty on the device and 10 years after-sales service
    • Training to work with the device after delivery of the product
    • Provide manuals and maintenance of the device at the time of delivery

    Grippul

    What is a Grippul Device

    In U-Type converters, RayTube operation is a bit difficult, so you have to first release the two ends of the tube from the sheet tube with a Tube Cutter. To do this, the two ends of the tube are first cut about 2 inches in front of the tube sheet, and the Grippul is pulled out. So that the rest of the tube, part U, can be removed from the end of the converter using a pneumatic winch or similar tool. In this design, a completely hydraulic device called a tube killer performs the operation of pulling the tube. Stub puller speeds up the operation of the re-tube.

    Due to the destruction of sheet tubes during re-tubing and the damage applied during the extraction of tube, the importance of this device is well known. Stub puller pulls out the tube without the slightest damage.

    تیوب باندل گریپول

    Free technical advice

    Contact us for technical advice and more information

    • Quick removal of ferrous and non-ferrous pipes from condensers, heat exchangers and boilers
    • The rapid operation of the device allows the operator to remove 10 pipes per minute
    • Taking and pulling the tube together and together
    • Lightweight and lightweight components summarized in a gun, for easy and fast use by the operator
    • Separate and discard the pumice stone quite easily and automatically after pulling out
    • Remove the tube without the slightest damage to the sheet tube
    • Low setup time and ease of use
    • Fast and automatic switching from low pressure and high current to high pressure and low current during conflict
    • Significant savings of time and money more than the usual methods of pipe removal
    • Ability to remove the tube from the size of 15.8 mm to 50.8 mm

    • Design and manufacture of heat exchanger pumice machine (grippul) with optimal performance
    • Provide services for pulling out tubes from tube sheet in a very short time
    • Ability to design based on customer needs for specific applications
    • Reconstruction and repair of grippul devices
    • Provide advice on choosing the right device and how to use it
    • Supply of machine parts and accessories in less than a week
    • Test and setup
    • Training to work with the device
    • 18 months warranty on the device and 10 years after-sales service
    • Training to work with the device after delivery of the product
    • Provide manuals and maintenance of the device at the time of delivery
    با ما در ارتباط باشید / Contact us
    Send via WhatsApp